They explained the materials used to manufacture fiber optics, of which are materials that transport light and are made from a collection of super thin glass or plastic fibers enclosed in a tube. They also expounded on the basic structure of fiber optic cabling. The first end being at a source of light, whereas the other end is a camera lens, intended to channel images and light around the bends and corners.

Fiber optics have an extremely transparent core of glass, or plastic enclosed by a covering called “cladding”. Light is stimulated through a source on one end of the fiber optic and as the light travels through the tube, the cladding is there to keep it all inside. A bundle of fiber optics may be bent or twisted without distorting the image, as the cladding is designed to reflect these lighting images from inside the surface. This fiber optic light source can carry light over mass distances, ranging from a few inches to over 100 miles.

In this article, we also learn that there are two kinds of fiber optics.

1. Single-mode fiber optics, used for high speed and long distance transmissions. These are used in long distances because they have extremely tiny cores and they accept light only along the axis of the fibers.

2. Multi-mode fiber optics, fibers that have much larger cores, accept light from a variety of angles, and can use more types of light sources. Multi-mode fiber optics use less expensive connectors, but they cannot be used over long distances as with the single-mode fiber optics.

Fiber optics are commonly used in communication systems. Fiber optic communication systems are installed in large networks of fiber optic bundles all around the world and even under the oceans. Many fiber optic testers are available to provide you with the best fiber optic equipment.

The result of this fiber optic configuration, messages transmitted in numeric code by flashing on and off at high speeds. This code can represent a voice or an electronic file containing text, numbers, or illustrations. The light from many lasers are added together onto an individual fiber optic enabling thousands of currents of data to pass through a single fiber optic cable at one time. Industries also use fiber optics to measure temperatures, pressure, acceleration and voltage, among an assortment of other uses.

For more information, you can visit this website: http://comunidadlashormigas.org/technology/a-brief-introduction-to-fiber-optics-technology.htm

Our Domialle MT Hand Puck Kit has proven very beneficial to our customers; great for repairs or final inspection.

This unique fixture is designed to hand polish MT Connectors in low volume, prototyping or repair situations. This design uses Domaille Engineering’s patented MTEZ ferrule holding system and is available in either flat or 8° angled configuration. This system includes hand puck, glass plate, containment disk and pry tool.

Fixture Benefits:

• EZ loading with patented MTEZ clamping system.
• Utilizes containment disk to hold glass plate for ease of polishing.
• Available for either MT APC or MT UPC connectors
• Spring loaded for ease of applying pressure
• Ground carbide feet for accuracy and durability
• Torque wrench available for repeatable process

Check out the links for pricing and details:

Interested in a complete production oriented polishing Machine?

We have the Domialle APM 5200 Fiber Polishing Machine.

Follow link for details: Domialle APM 5200

For the convenience of our customers Precision Fiber Products, Inc. is delighted to announce our new online quoting system.

You can now obtain a quote for internal routing and budgetary purposes from our website. All items will be saved in your shopping cart for easy purchase by you or your purchasing department.

Simply log in and choose from thousands of products.

Designed to assist our customers in obtaining purchase approval or to use as a reference for internal routing. Obtain a quote in a matter of minutes.

• Step 1: Create an account or sign in
• Step 2: Choose your product requirements and add to cart
• Step 3: Press “Check Out or Obtain Quote” button on cart
• Step 4: Choose “QUOTE” instead of “PURCHASE”

An e-mailed quote will arrive instantly. You may also choose to print a copy to attach to your requisition.

We hope this feature makes your jobs a little easier

- PFP Management Team

- Call or visit our Website and take advantage of our quick delivery and service.

Ph. 1-408-946-4040

Once fiber type is identified…

Step 1: Choose 1st connector
Step 2: Designate desired cable length
Step 3: Choose 2nd connector (or pigtail)
Step 4: Specify quantity and Add to Cart for price.

Call or visit our website to take advantage of our quick delivery and service.

Ph. 1-408-946-4040

PFP offers Quick Turn Custom Patch Cords, Fused Coupler and Variable Attenuator Assemblies. We build to order! Simply choose your fiber type, and then configure your connector -in less than 5 minutes.

• One Day Lead Time Available.
• Thousands of variations made to order – you choose.
• Singlemode, Multimode and 10g Patch Cable Assemblies available.
• ST, SC, LC MU, FC, FC/APC, LC/APC, SC/APC and MT-RJ style connectors.
• Simplex 900um, 2mm, 3mm & Duplex 2mm, 3mm fiber types
• US ISO 9001:2000 compliant.
• Meets or exceeds Telcordia standards.
• Applications include Ethernet, Fiber Channel, Infiniband, ATM & Internet.

Find and configure your Custom Patchcord, Fused Coupler or Variable Attenuator Assembly below:

• Patchcords
• Fused Coupler Assemblies
• Variable Attenuator Assemblies

See our full selection here: FuseConnect

Looking for a quick mechanical splice?

AFL’s new FAST Connectors are pre-polished, field installable connectors that eliminate the need for hand polishing in the field. FAST Connectors provide an immediate termination to either single-mode or multimode fibers and are color-coded for ease of fiber identification. Connectors for Laser Optimized 50µm (10G) fibers are also available. Available in SC.ST and LC configurations.

See our selection here: FastConnect

PFP’s Own Brand- Splice Protection Sleeves

Our best seller is the 60mm Splice Protector Sleeve and they are now in stock and can be purchased on-line…Splice Protection Sleeves.

We also feature:

• Replacement Cleaver Blades
• Splicer Electrodes

We also feature:

Cletop Cassette Cleaner Series

Consistent cleaning results without IPA alcohol

The Cletop connector cleaner is a rugged palm-sized cleaner that offers exceptional performance with a proven track record. The choice of many leading manufacturers and telecom carries worldwide for nearly 20 years –Cletop is a name you can rely on.

Why Clean Fiber Connectors?

• Pits and scratches are often caused by dirt
• Dust, dirt, oils, are everywhere and will migrate to exposed connector end-faces
• Dirty connectors attenuate signal levels and can increase digital bit error rates
• Always clean both connectors when mating / unmating to avoid contamination transfer

Features:

• Compact and lightweight design is ideal for use in laboratories, assembly lines, or in the field.
• Consistent cleaning results without IPA alcohol, which is toxic, flammable, and leaves a residue on fiber ends (white haze)
• Excellent anti-static properties for static sensitive applications and to minimize reattachment of dust to ferrule after cleaning.
• Simple push button shutter operation exposes cleaning tape only when in use– minimizing unwanted dust.
• Replaceable and cost effective cleaning tape.
• Over 400 wipes per tape.

Build your own fiber optic Patch Cord in less than 5 minutes! Once fiber type is identified…

Step 1: Choose 1st connector
Step 2: Designate desired cable length
Step 3: Choose 2nd connector (or pigtail)
Step 4: Specify quantity and Add to Cart for price.

Call or visit our website and take advantage of our quick delivery and service.

Ph. 1-408-946-4040

---

PFP is now producing Multifiber Indoor Cable (MIC) products. Available in custom connector configurations and cable lengths.

Choose from the following products:

• Singlemode (SMF-28e+) MIC (Multifiber Indoor Cable) Distribution Pigtails
  
• Multimode (OM2) MIC (Multifiber Indoor Cable) Distribution Pigtails
  
• 10 Gig (OM3) MIC (Multifiber Indoor Cable) Distribution Pigtails 
  
• 10 Gig (OM4) MIC (Multifiber Indoor Cable) Distribution Pigtails

Thousands of variations made to order – you choose.

Also, configure your Custom Patchcord, Fused Coupler or Variable Attenuator Assembly below:

• Patchcords
• Fused Coupler Assemblies
• Variable Attenuator Assemblies      

Wall Mount Units

Rack Mount Units

Multilink’s family of fiber distribution products are quality engineered product that provide excellent protection of fiber cables, ease of installation, at a great value. The enclosures can be pre-terminated to save time in the field. A wide selection of adapter panels will cover most any application.

• Available with Pre-terminated cabling or pigtails.
• Complete family of low, medium and high capacity distribution.
• Easy to install, load, and maintain.
• Improved access to network terminations or splices.
• Rack and wall mount applications.
• Several units are designed with additional means of security but maintaining ease in access.
• Steel or aluminum with a polyester powder coat finish in either standard Black or Off White.
• Variations support patching, splicing or patch and splice.

Splice Trays

Splice Trays

All of the Multilink splice trays are universal to the industry. These trays are compatible with all of our enclosures. The splice trays provide protection and organization of fiber splices. Adhesive backed fiber insert holders and assorted cable ties included.

• Adhesive backed fiber insert holders and assorted cable ties included.
• Protection and organization of fiber splices.

Introducing a reliable precision rubber polishing pad.

Lowest price available anywhere!

SPECIFICATIONS:*

PADS	DUROMETER (shore A)	PARALLELISM (mm)	THICKNESS (mm)	DIAMETER (inches)
Orange	40 +/- 2.5	< 0.01	+/- 0.05	+ 0.00/-0.02
Burgundy	45 +/- 2.5	< 0.01	+/- 0.05	+ 0.00/-0.02
Red	50 +/- 2.5	< 0.01	+/- 0.05	+ 0.00/-0.02
Rust	55 +/- 2.5	< 0.01	+/- 0.05	+ 0.00/-0.02
Blue	60 +/- 2.5	< 0.01	+/- 0.05	+ 0.00/-0.02
Dark Blue	65 +/- 2.5	< 0.01	+/- 0.05	+ 0.00/-0.02
Violet	70 +/- 2.7	< 0.01	+/- 0.05	+ 0.00/-0.02
Brown	75 +/- 2.7	< 0.01	+/- 0.05	+ 0.00/-0.02
Green	80 +/- 3.0	< 0.01	+/- 0.05	+ 0.00/-0.02
Gray	85 +/- 3.0	< 0.01	+/- 0.05	+ 0.00/-0.02
Black	90 +/- 3.0	< 0.01	+/- 0.05	+ 0.00/-0.02

* Custom sizes
available upon request.
^± Distribution opportunities now
available.

To learn more about us and our products please call 408-946-4040 or e-mail marketing@precisionfiberproducts.com or visit our website at www.precisionfiberproducts.com

]]> http://www.precisionfiberproducts.com/blog/2010/10/reliable-precision-rubber-polishing-pad/feed/ 0 http://www.precisionfiberproducts.com/blog/2010/10/important-product-announcement-2/ http://www.precisionfiberproducts.com/blog/2010/10/important-product-announcement-2/#comments Fri, 15 Oct 2010 19:21:45 +0000 admin http://www.precisionfiberproducts.com/blog/?p=526

Important Product Announcement

PFP has added many tools to our product offering.

We have expanded our Fiber Optic Tool set along with adding Datacom and
Electrical Tools.
Tools that our Fiber Optic and CATV customers find accurate
and reliable.

Precision Fiber Products continues to add products that assist our
customers.
Our goal is to make your job easier by offering the best selection
in on place!

We represent Manufacturers like: Miller, Paladin, CableMatic and Ideal

Choose from: